Lathe Tooling Homepage
   
 
 
CheckoutBasket
Home Shop
 



Glanze G Clamp Type Indexable Turning Tools



Glanze Lathe Tooling >  Glanze G Clamp Type Indexable Turning Tools


Rigid Clamp Glanze GCLNL Industrial Turning Tool with 5 Inserts 20 mm Shank  (Ref: GCLNL2020K12)

Rigid Clamp Glanze GCLNL Industrial Turning Tool with 5 Inserts 20 mm Shank

Superb Industrial Quality from Glanze !

This is a Multipurpose tool holder equipped with a rhombic negative double side insert (angle 80 Deg.) with strong cutting edge. The double lock ensures good rigidity and chip flow in roughing applications. External turning toolholder for general applications, roughing, semi-finishing and finishing. Cutting edge 95 Deg. External facing.

Use for general application Steel Turning. Rhombic 80 Deg. Negative Carbide Insert.

Complete with 5 x CNMG 1204 Inserts

20 mm Square Shank


50.80 60.96


Quantity:  





Rigid Clamp Glanze GCLNL Industrial Turning Tool with 5 Inserts 25 mm Shank  (Ref: GCLNL2525K12)

Rigid Clamp Glanze GCLNL Industrial Turning Tool with 5 Inserts 25 mm Shank

Superb Industrial Quality from Glanze !

This is a Multipurpose tool holder equipped with a rhombic negative double side insert (angle 80 Deg.) with strong cutting edge. The double lock ensures good rigidity and chip flow in roughing applications. External turning toolholder for general applications, roughing, semi-finishing and finishing. Cutting edge 95 Deg. External facing.

Use for general application Steel Turning. Rhombic 80 Deg. Negative Carbide Insert.

Complete with 5 x CNMG 1204 Inserts

25 mm Square Shank


54.20 65.04


Quantity:  





Rigid Clamp Glanze GDJNR Industrial Turning Tool with 5 Inserts 20 mm Shank  (Ref: GDJNR2020K15)

Rigid Clamp Glanze GDJNR Industrial Turning Tool with 5 Inserts 20 mm Shank

Superb Industrial Quality from Glanze !

Turning & profiling tool holder equipped with rhombic negative double side insert (angle 55 Deg.) with a strong cutting edge. The double lock ensures good rigidity and chip flow in roughing applications. External turning toolholder for general applications, roughing, semi-finishing and finishing. External coping 93 Deg.


Complete with 5 x DNMG 1506 Inserts

20 mm Square Shank


50.80 60.96


Quantity:  





Rigid Clamp Glanze GDJNR Industrial Turning Tool with 5 Inserts 25 mm Shank  (Ref: GDJNR2525K15)

Rigid Clamp Glanze GDJNR Industrial Turning Tool with 5 Inserts 25 mm Shank

Superb Industrial Quality from Glanze !

Turning & profiling tool holder equipped with rhombic negative double side insert (angle 55 Deg.) with a strong cutting edge. The double lock ensures good rigidity and chip flow in roughing applications. External turning toolholder for general applications, roughing, semi-finishing and finishing. External coping 93 Deg.


Complete with 5 x DNMG 1506 Inserts

25 mm Square Shank


54.20 65.04


Quantity:  





Rigid Clamp Glanze GDJNL Industrial Turning Tool with 5 Inserts 25 mm Shank  (Ref: GDJNL2525K15)

Rigid Clamp Glanze GDJNL Industrial Turning Tool with 5 Inserts 25 mm Shank

Superb Industrial Quality from Glanze !

Turning & profiling tool holder equipped with rhombic negative double side insert (angle 55 Deg.) with a strong cutting edge. The double lock ensures good rigidity and chip flow in roughing applications. External turning toolholder for general applications, roughing, semi-finishing and finishing. External coping 93 Deg.


Complete with 5 x DNMG 1506 Inserts

25 mm Square Shank


54.20 65.04


Quantity:  





Rigid Clamp Glanze GWLNR Industrial Turning Tool with 5 Inserts 20 mm Shank  (Ref: GWLNR2020K06)

Rigid Clamp Glanze GWLNR Industrial Turning Tool with 5 Inserts 20 mm Shank

Superb Industrial Quality from Glanze !

Multipurpose tool holder equipped with trigon negative double side insert (angle 80 Deg.) with strong cutting edge. The double lock ensures good rigidity and chip flow in roughing applications. External turning toolholder for general applications, roughing, semi-finishing and finishing. Tool setting angle 95 Deg.

Use for general application Steel Turning. Trigon 80 Deg. Negative Carbide Insert.

Complete with 5 x WNMG 0604 Inserts

20 mm Square Shank


50.80 60.96


Quantity:  





Rigid Clamp Glanze GWLNL Industrial Turning Tool with 5 Inserts 20 mm Shank  (Ref: GWLNL2020K06)

Rigid Clamp Glanze GWLNL Industrial Turning Tool with 5 Inserts 20 mm Shank

Superb Industrial Quality from Glanze !

Multipurpose tool holder equipped with trigon negative double side insert (angle 80 Deg.) with strong cutting edge. The double lock ensures good rigidity and chip flow in roughing applications. External turning toolholder for general applications, roughing, semi-finishing and finishing. Tool setting angle 95 Deg.

Use for general application Steel Turning. Trigon 80 Deg. Negative Carbide Insert.

Complete with 5 x WNMG 0604 Inserts

20 mm Square Shank


50.80 60.96


Quantity:  





Rigid Clamp Glanze GWLNR Industrial Turning Tool with 5 Inserts 25 mm Shank  (Ref: GWLNR2525M06)

Rigid Clamp Glanze GWLNR Industrial Turning Tool with 5 Inserts 25 mm Shank

Superb Industrial Quality from Glanze !

Multipurpose tool holder equipped with trigon negative double side insert (angle 80 Deg.) with strong cutting edge. The double lock ensures good rigidity and chip flow in roughing applications. External turning toolholder for general applications, roughing, semi-finishing and finishing. Tool setting angle 95 Deg.

Use for general application Steel Turning. Trigon 80 Deg. Negative Carbide Insert.

Complete with 5 x WNMG 0604 Inserts

25 mm Square Shank


54.20 65.04


Quantity:  





Rigid Clamp Glanze GWLNL Industrial Turning Tool with 5 Inserts 25 mm Shank  (Ref: GWLNL2525M06)

Rigid Clamp Glanze GWLNL Industrial Turning Tool with 5 Inserts 25 mm Shank

Superb Industrial Quality from Glanze !

Multipurpose tool holder equipped with trigon negative double side insert (angle 80 Deg.) with strong cutting edge. The double lock ensures good rigidity and chip flow in roughing applications. External turning toolholder for general applications, roughing, semi-finishing and finishing. Tool setting angle 95 Deg.

Use for general application Steel Turning. Trigon 80 Deg. Negative Carbide Insert.

Complete with 5 x WNMG 0604 Inserts

25 mm Square Shank


54.20 65.04


Quantity:  





Rigid Clamp Glanze GWLNR Industrial Turning Tool with 5 Inserts 20 mm Shank  (Ref: GWLNR202K08)

Rigid Clamp Glanze GWLNR Industrial Turning Tool with 5 Inserts 20 mm Shank

Superb Industrial Quality from Glanze !

Multipurpose tool holder equipped with trigon negative double side insert (angle 80 Deg.) with strong cutting edge. The double lock ensures good rigidity and chip flow in roughing applications. External turning toolholder for general applications, roughing, semi-finishing and finishing. Tool setting angle 95 Deg.

Use for general application Steel Turning. Trigon 80 Deg. Negative Carbide Insert.

Complete with 5 x WNMG 0804 Inserts

20 mm Square Shank


50.80 60.96


Quantity:  





Rigid Clamp Glanze GWLNL Industrial Turning Tool with 5 Inserts 20 mm Shank  (Ref: GWLNL2020K08)

Rigid Clamp Glanze GWLNL Industrial Turning Tool with 5 Inserts 20 mm Shank

Superb Industrial Quality from Glanze !

Multipurpose tool holder equipped with trigon negative double side insert (angle 80 Deg.) with strong cutting edge. The double lock ensures good rigidity and chip flow in roughing applications. External turning toolholder for general applications, roughing, semi-finishing and finishing. Tool setting angle 95 Deg.

Use for general application Steel Turning. Trigon 80 Deg. Negative Carbide Insert.

Complete with 5 x WNMG 0804 Inserts

20 mm Square Shank


50.80 60.96


Quantity:  





Rigid Clamp Glanze GWLNR Industrial Turning Tool with 5 Inserts 25 mm Shank  (Ref: GWLNR2525M08)

Rigid Clamp Glanze GWLNR Industrial Turning Tool with 5 Inserts 25 mm Shank

Superb Industrial Quality from Glanze !

Multipurpose tool holder equipped with trigon negative double side insert (angle 80 Deg.) with strong cutting edge. The double lock ensures good rigidity and chip flow in roughing applications. External turning toolholder for general applications, roughing, semi-finishing and finishing. Tool setting angle 95 Deg.

Use for general application Steel Turning. Trigon 80 Deg. Negative Carbide Insert.

Complete with 5 x WNMG 0804 Inserts

25 mm Square Shank


54.20 65.04


Quantity:  





Rigid Clamp Glanze GWLNL Industrial Turning Tool with 5 Inserts 25 mm Shank  (Ref: GWLNL2525M08)

Rigid Clamp Glanze GWLNL Industrial Turning Tool with 5 Inserts 25 mm Shank

Superb Industrial Quality from Glanze !

Multipurpose tool holder equipped with trigon negative double side insert (angle 80 Deg.) with strong cutting edge. The double lock ensures good rigidity and chip flow in roughing applications. External turning toolholder for general applications, roughing, semi-finishing and finishing. Tool setting angle 95 Deg.

Use for general application Steel Turning. Trigon 80 Deg. Negative Carbide Insert.

Complete with 5 x WNMG 0804 Inserts

25 mm Square Shank


54.20 65.04


Quantity:  





Rigid Clamp Glanze GTJNR Industrial Turning Tool with 5 Inserts 20 mm Shank  (Ref: GTJNR2020K16)

Rigid Clamp Glanze GTJNR Industrial Turning Tool with 5 Inserts 20 mm Shank

Superb Industrial Quality from Glanze !

Tool Holder for external turning applications equipped with triangular negative inserts & strong cutting edges. The double lock ensures good rigidity and chip flow in roughing applications. External turning tool holder for general applications, roughing, semi-finishing and finishing. Support for Turning 93 Deg.

Complete with 5 x TNMG 1604 Inserts

20 mm Square Shank


50.80 60.96


Quantity:  





Rigid Clamp Glanze GTJNL Industrial Turning Tool with 5 Inserts 20 mm Shank  (Ref: GTJNL2020K16)

Rigid Clamp Glanze GTJNL Industrial Turning Tool with 5 Inserts 20 mm Shank

Superb Industrial Quality from Glanze !

Tool Holder for external turning applications equipped with triangular negative inserts & strong cutting edges. The double lock ensures good rigidity and chip flow in roughing applications. External turning tool holder for general applications, roughing, semi-finishing and finishing. Support for Turning 93 Deg.

Complete with 5 x TNMG 1604 Inserts

20 mm Square Shank


50.80 60.96


Quantity:  





Rigid Clamp Glanze GTJNR Industrial Turning Tool with 5 Inserts 25 mm Shank  (Ref: GTJNR2525K16)

Rigid Clamp Glanze GTJNR Industrial Turning Tool with 5 Inserts 25 mm Shank

Superb Industrial Quality from Glanze !

Tool Holder for external turning applications equipped with triangular negative inserts & strong cutting edges. The double lock ensures good rigidity and chip flow in roughing applications. External turning tool holder for general applications, roughing, semi-finishing and finishing. Support for Turning 93 Deg.

Complete with 5 x TNMG 1604 Inserts

25 mm Square Shank


54.20 65.04


Quantity:  





Rigid Clamp Glanze GTJNL Industrial Turning Tool with 5 Inserts 25 mm Shank  (Ref: GTJNL2525K16)

Rigid Clamp Glanze GTJNL Industrial Turning Tool with 5 Inserts 25 mm Shank

Superb Industrial Quality from Glanze !

Tool Holder for external turning applications equipped with triangular negative inserts & strong cutting edges. The double lock ensures good rigidity and chip flow in roughing applications. External turning tool holder for general applications, roughing, semi-finishing and finishing. Support for Turning 93 Deg.

Complete with 5 x TNMG 1604 Inserts

25 mm Square Shank


54.20 65.04


Quantity:  





Replacement WNMG Insert  (Ref: WNMG06)

Replacement WNMG Insert


4.20 5.04


Quantity:  





Spare Screw for Glanze G Type Lathe Tool  (Ref: GS01)

Spare Screw for Glanze G Type Lathe Tool


3.00 3.60


Quantity:  





Glanze Lathe Tooling >  Glanze G Clamp Type Indexable Turning Tools